Assembly Adhesives

Key Polymer manufactures a wide range of industrial adhesives

Optimize Operations & Meet Product Requirements

Our business plan is built on the concept of working directly with each customer to establish a comprehensive engineering solution that optimizes both product and process. Key Polymer’s technical staff evaluates each customer’s requirements in cooperation with their technical and production staff.

Cost, end product performance, and efficient production cycling are considered in product design by Key Polymer’s chemists and chemical engineers.

Key Polymer manufactures a wide range of industrial adhesives based on the following technologies:
  • Epoxy
  • Polyurethane
  • Water-based emulsions – acrylic, vinyl acetate, SBR, etc.
  • Solvent rubber and solvent resin blends

Typical Applications

Lamp Basing Cements

Key Polymer lamp basing cements provide high temperature performance under tough conditions.

Induction Curing/Magnet Bonding

Key Polymer industrial adhesives bond magnets on motors using rapid induction curing.

Flocking Adhesive

Key Polymer is the major developer and producer of specialty adhesives for the Roll-to-Roll Flocking Industry in North America. Experienced technical staff will thoroughly review your requirements, including color matching, product design, and batch sizes, and respond with laboratory made product samples for customer evaluations.

NO MIX – Heat Curing One Component Adhesives

Storage stable, one component structural adhesives are heat activated to gap fill, shim, and bond.

FRP Fiberglass & Composite Bonding

FRP, Fiber Reinforced Plastics & graphite composite parts.

Aluminum Adhesion

Specific tenacious adhesion to aluminum with Key Industrial adhesives.

Pipes and tanks and wires

Aluminum Adhesion

magnetic bonding inductors

Induction Curing/Magnet Bonding

FRP Fiberglass


Lamp Basing Cements

Medium Shear


Panel Assembly

Stainless Steal to Honeycomb Cores
Our two part, room temperature cure epoxy structural panel adhesives have performed flawlessly in decades of environmental exposure in rugged service on light rail and subway car door and panel applications.


Vinyl to Board Adhesives

Key 100% epoxy solution “welds” vinyl and wood together, resulting in a 180°F temperature resistant bond.

Aluminum to Polystyrene Adhesives

Build panels for environmental enclosures with Key Polymer’s easy to apply two part epoxy. It provides excellent working life with overnight cure.

Stainless Steel to Plywood Adhesives

Key Epoxy two part room temperature cure systems are used in applications like the custom production of commercial architectural door units. They may be applied by hand trowel or with coating equipment.

Vinyl to Board Adhesives

Our 100% epoxy system “welds” vinyl and wood together to 180°F temperature resistant bonds. Easy to use, with a long processing work life.

Aluminum Panels to Honeycomb Cores

Two part, room temperature cure epoxy adhesives that have demonstrated years of environmental durability in demanding applications. Specific aggressive adhesion to aluminum with these Key industrial adhesives.

Ready To Talk to Us?

Contact us to discuss your project and requirements for Adhesives or Coatings!